Avaya Communication Server 1000M Single Group Manual page 56

Installation and configuration
Component
LMI
NT5D68
LMX
NT5D69
LMI Multi-I/O Cable
Assembly
NT5D85
LMI/LMX Multi-I/O
Cable Assembly
NT5D86
RMI Multi-I/O
Cable Assembly
NT5D87
SDI Cable Kit
NT7R66AA
56 Mini-Carrier Remote Fundamentals
Local Mini-carrier Interface card (LMI) for installation in cabinet line
card slots.
Local Mini-carrier Extender card (LMX) for installation in cabinet line
card slots. Up to three LMXs may be installed, depending on
configuration.
This 2 foot cable has a 50-pin Amphenol connector at one end that fits
the I/O connector for the first of the two line card slots occupied by the
LMI. The opposite end has five connectors (see
O cable assembly (NT5D85)
1. P2 First T1 carrier link
2. P3 Second T1 carrier link
3. P4 External alarm
4. P5 Man-Machine Interface (MMI)
5. P6 Serial Data Interface (SDI)
This 2 foot cable has a 50-pin Amphenol connector at one end that fits
the I/O connector for the second of the two line card slots occupied by
the LMI. The opposite end has three connectors, which are for:
• P2 LMX1
• P3 LMX 2
• P4 LMX3
(See Figure 6: LMI/LMX Multi-I/O cable assembly (NT5D86)
This 2 foot cable has a 50-pin Amphenol connector at one end that fits
the I/O connector for the controller slot occupied by the RMI. The
opposite end has five connectors, which are for:
1. First T1 carrier link
2. Second T1 carrier link
3. External alarm
4. Man-Machine Interface (MMI)
5. (not used)
(See Figure 7: RMI Multi-I/O Cable Assembly (NT5D87)
This cable kit provides:
1 cable (10-foot, DB-9 male to DB-25 male)
1 adapter (DB-25F/DB-25F)
4 standoffs (0.125L, #6, round, nylon)
4 rivets (0.125 dia., 0.25 head)
At the local site, use this cable to connect the standard SDI card to the
male DB-9 connector (P5) of the NT5D85 LMI Multi-I/O Cable
Assembly.
Comments? infodev@avaya.com
Description
Figure 5: LMI Multi-I/
on page 25). The five connectors are for:
page 26.)
on
on page 27.)
March 2013