Note:
All SPAN configuration values are stored on the LMI. If the user replaces the LMI for any
reason, all values set with the SET SPAN command and all commands on the Span setup
menu must be reconfigured.
Figure 56: SET SPAN (S S) screen
SET TIME (S T)
This command configures the time kept at the near end of the system. Its display is similar to
Figure 57: SET TIME (S T) screen
Figure 57: SET TIME (S T) screen
SET TIME DISTANT (S T D)
This command configures the time kept at the distant end by the system. Its display is similar
to
Figure 57: SET TIME (S T) screen
Mini-Carrier Remote Fundamentals
on page 97.
on page 97.
Host MMI interface
March 2013
97