Installation and configuration
8. End (Save) — This command allows the user to exit the ESAM setup menu and
SET NAME (S N)
This command sets the name of the near-end and remote sites. Its display is similar to
55: SET NAME (S N) screen
Figure 55: SET NAME (S N) screen
SET SPAN (S S)
This command allows the user to set the number of timeslots used by the T1. Its display is
similar to
Figure 56: SET SPAN (S S) screen
96
Mini-Carrier Remote Fundamentals
Figure 53: SET ESAM: QUIT (NO SAVE) screen
save any changes made to the system's ESAM configuration settings during the
session. Its display is similar to
page 96.
Figure 54: SET ESAM: END (SAVE) screen
on page 96.
Comments? infodev@avaya.com
Figure 54: SET ESAM: END (SAVE) screen
on page 97.
on
Figure
March 2013