HRS216PKA • HRS216SKA • HRS216VKA
2. Remove the set bolt, float chamber, float pin, float
valve, and float.
Clean and then inspect the float valve tip for damage
and replace if necessary. See image on
3. Remove the main jet and the main nozzle.
With the main jet removed, push down on the top of
the main nozzle with a screwdriver.
If the nozzle does not come out, spray carburetor
cleaner around the nozzle to loosen it and tap the
carburetor on the workbench.
4. Remove the throttle stop screw and spring (if
applicable).
page
7-4.
SCREWDRIVER
FUEL SYSTEM
7-5