Honda HRS216PKA Manual page 110

HRS216PKA • HRS216SKA • HRS216VKA
8. Remove the Smart Drive cable from the lower grip bracket and then from the handle pipe assembly.
9. Remove the starter rope from the rope guide, and then remove the 6 mm locking nut and the rope guide.
10. Remove the two special bolts, nylon washers, and the handle assembly from the handle stays.
11. Drive out the two 2 x 12 mm roll pins and remove the handle lock assemblies.
ROPE GUIDE
HANDLE STAY (2)
REPLACEMENT:
8 mm PIN (2)
HEIGHT
ADJUSTING
COLLAR (2)
12. Install the handle pipe in the reverse order of its removal.
• Reassemble the Smart Drive control before attaching the lower end of the Smart Drive cable to the
transmission.
13. Readjust the Smart Drive cable
P. 10-9
(P. 3-9).
6 mm LOCKING NUT
HEIGHT
ADJUSTING
SPRING (2)
HANDLE PIPE/CABLES
NYLON WASHER (2)
SPECIAL BOLT (2)
2 x 12 mm ROLL PIN (2)
HANDLE LOCKING KNOB (2)
(P. 10-12)
INSTALLATION:
10-5