Honda HRS216PKA Manual page 115

HANDLE PIPE/CABLES
6. Remove the pinion gear collars and wheel covers from
each side.
7. Remove the remaining thrust collars, 13 mm washers,
and circlips from each side.
8. Remove the 25 mm circlip from each side, and slide
them and the 26 x 36 mm washers inward toward the
transmission.
9. Remove the adjuster assembly from each side, taking
care not to damage the seals.
10-10
HRS216PKA • HRS216SKA • HRS216VKA
ADJUSTER
ASSEMBLY
26 x 36 mm
WASHER
25 mm
CIRCLIP
WHEEL
PINION
COVER
GEAR
COLLAR
THRUST COLLAR
13 mm WASHER
13 mm
CIRCLIP