Honda HRS216PKA Manual page 23

SERVICE INFORMATION
ONLY ONE WHEEL PROPELS OR ONE WHEEL INTERMITTENTLY STOPS ROTATING
UNDER LOAD (CLICKING SOUND CAN BE HEARD)
1. Clean and inspect the pinion gears, wheel
gears, and ratchet keys.
2. Apply Honda Marine extreme pressure
NLGI #2 GC-LB grease or equivalent to the
ratchet key, spring, and axle on the left and
right sides.
IMPORTANT:
Only use an extreme pressure NLGI #2
GC-LB wheel bearing grease. Proper
application of the correct grease is critical to
ensure proper operation.
DO NOT USE anti-seize, white lithium,
silicone, WD-40, or any other spray lubricant.
3. Be sure the correct pinion gears are installed:
8-inch wheels use 12-tooth pinion gears.
2-14
HRS216PKA • HRS216SKA • HRS216VKA


R ATCHET

R ATCHET
KEY
SPRING
A XLE
FLAT WASHER
WHEEL WASHER
REASSEMBLY:
Install the washer as
shown.
WHEEL
SIDE
PINION GEAR (12 tooth)
Install with the
punch mark
facing:
Left - inside
Right - outside
PINION
GEAR
COLLAR
13 mm
CIRCLIP
WHEEL BOLT
REAR WHEEL