Honda HRS216PKA Manual page 142

HRS216PKA • HRS216SKA • HRS216VKA
16. Remove the 25 mm circlip from each side, and slide
them and the 26 x 36 mm washers inward toward the
transmission.
17. Remove the adjuster assembly from each side, taking
care not to damage the seals.
18. Remove the transmission from the mower deck.
a. Slide the transmission assembly to the right side until
the axle shaft is clear of the left handle stay and
mower deck hole.
b. Tilt the left side of transmission assembly away from
the mower deck, and then pull the right side of the
transmission axle shaft out of the right side handle
stay hole.
TRANSMISSION / DRIVE BELT
ADJUSTER
ASSEMBLY
26 x 36 mm
WASHER
25 mm
CIRCLIP
LEFT SIDE
RIGHT
SIDE
12-11