Honda HRS216PKA Manual page 104

HRS216PKA • HRS216SKA • HRS216VKA
CYLINDER BLOCK MAIN JOURNAL I.D.
INSPECTION
Standard
25.420 mm (1.0008 in)
Inspect the bearing surface for scoring or damage. If the bearing
surface is worn or damaged, the cylinder block and
crankshaft will require replacement.
OIL PAN MAIN JOURNAL I.D. INSPECTION
Standard
28.020 mm (1.1031 in)
Inspect the bearing surface for scoring or damage. If the bearing
surface is worn or damaged, the oil pan and crankshaft will
require replacement.
CRANKSHAFT AXIAL CLEARANCE INSPECTION
Measure the crankshaft axial play before removing the oil pan,
crankshaft, and piston.
Standard
0.15 ~ 0.75 mm
(0.006 ~ 0.030 in)
If the axial clearance is too great, inspect the oil pan and timing
gear thrust washer for wear and replace as necessary.
VALVE SPRING FREE LENGTH INSPECTION
Measure the free length of the valve springs.
Standard
30.5 mm (1.20 in)
Replace the springs if they are shorter than the service limit.
Service limit
25.466 mm (1.0026 in)
Service limit
28.066 mm (1.1050 in)
Service limit
1.0 mm
(0.04 in)
Service limit
29.0 mm (1.14 in)
CAM PULLEY/CRANKSHAFT/PISTON/
CYLINDER BLOCK
9-19