HRS216PKA • HRS216SKA • HRS216VKA
6. Attach a dial indicator with a magnetic base to the steel plate
as shown.
7. Use the dial indicator to measure the rocker arm pivot
free-play at locations A and B following the procedure in
step
8.
8. Position the dial indicator against the exhaust rocker arm above the pivot pin in location A shown in
9. Push and hold the tappet screw against the exhaust valve.
10. While holding the tappet screw against the valve (maintain zero valve lash), move the rocker back and forth at
the pivot point and measure the rocker arm pivot point free-play with the dial indicator. Repeat the measurement
with the dial indicator at location B.
Maximum Allowable Rocker Arm Free-Play = 0.16 mm (0.0063 in)
SERVICE INFORMATION
A
B
FREE-PLAY
MEASUREMENT POINTS
step
2-19
7.