Honda HRS216PKA Manual page 102

HRS216PKA • HRS216SKA • HRS216VKA
CONNECTING ROD SMALL END I.D. INSPECTION
Standard
13.005 mm (0.5120 in)
CONNECTING ROD BIG END I.D. INSPECTION
Standard
26.02 mm (1.024 in)
CRANKSHAFT MAIN JOURNAL O.D. INSPECTION
PTO Side
Flywheel side
TIMING GEAR INSPECTION
The plastic timing gear is separate from the crankshaft.
Inspect the timing gear for excess wear, damage, or cracks and
replace if necessary. Always replace the timing belt when
replacing the gear.
Make sure the timing gear boss fits completely into the slot in
the crankshaft.
Service limit
13.07 mm (0.515 in)
Service limit
26.066 mm (1.0262 in)
Standard Service limit
27.993 mm 27.933 mm
(1.1021 in) (1.0997 in)
25.393 mm 25.333 mm
(0.9997 in) (0.9974 in)
CAM PULLEY/CRANKSHAFT/PISTON/
CYLINDER BLOCK
FLYWHEEL SIDE
TIMING GEAR
PTO SIDE
TIMING GEAR SLOT
9-17