Honda HRS216PKA Manual page 139

TRANSMISSION / DRIVE BELT
12. Remove the 22 mm circlip from the RIGHT side (farthest
away from the transmission) wheel adjuster. Carefully
remove the right side adjuster ensuring the seals are not
damaged.
It is not necessary to remove the left side adjuster parts.
13. Pivot the transmission and disconnect the plastic clutch
cable clip from the transmission bracket with needle-nose
pliers. Take care not to damage or force the clip.
14. Slide the transmission/axle to the right side until it clears
the left side adjuster. Rotate the transmission slightly, and
then lift it out of the mower deck.
12-8
HRS216PKA • HRS216SKA • HRS216VKA
ADJUSTER
ASSEMBLY
FLAT
WASHER
22 mm
CIRCLIP