HRS216PKA • HRS216SKA • HRS216VKA
2. CARBURETOR DISASSEMBLY/REASSEMBLY
Clean the outside of the carburetor before disassembly.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
•
Stop the engine and let it cool before handling fuel.
•
Keep heat, sparks, and flame away.
•
Handle fuel only outdoors.
•
Wipe up spills immediately.
NOTICE
Tampering is a violation of federal and California law.
CARBURETOR BODY
P. 7-4
CLEANING:
REASSEMBLY:
Clean internal passages and orifices with
compressed air (30 psi max) before installation.
MAIN NOZZLE
REASSEMBLY:
Clean thoroughly with compressed air
(30 psi max) before installation.
MAIN JET
Standard main jet size: #60
REASSEMBLY:
Clean thoroughly
with compressed
air (30 psi max)
before installation.
FLOAT
REASSEMBLY:
Check for smooth movement after installation.
P. 7-13
INSPECTION:
WARNING
SEALING
WASHER
5 x 6 mm ACCESS SCREW
FLOAT VALVE
REASSEMBLY:
Check for worn float valve seat and
float valve before installation.
FLOAT VALVE
FLOAT PIN
SET GASKET
FLOAT CHAMBER
SET BOLT
REASSEMBLY:
After assembly, check for any
signs of fuel leakage.
FUEL SYSTEM
INSPECTION:
Remove access screw to
clean the slow speed jet.
REASSEMBLY:
Clean thoroughly with
compressed air (30 psi
max).
PILOT JET
is non-removable
OK
REPLACE
7-3