Honda HRS216PKA Manual page 44

HRS216PKA • HRS216SKA • HRS216VKA
BRAKE SHOE INSPECTION
1. Remove the recoil starter
2. Remove the fan cover.
3. Measure the thickness of the brake shoe.
Service limit
4. If brake shoe thickness is less than the service limit,
replace the flywheel brake shoe.
FLYWHEEL BRAKE SPRING INSTALLATION
Flywheel removal is required to install a new spring
Install the flywheel brake spring as shown. Make sure the hook on
the long end of the spring is attached down through the hole in the
flywheel brake arm.
FLYWHEEL BRAKE CABLE INSPECTION
The flywheel brake cable cannot be adjusted. Inspect the flywheel
brake cable for damage and proper operation only.
(P. 6-1).
3.0 mm (0.12 in)
(P. 8-3).
MAINTENANCE
FLYWHEEL BRAKE SHOE
FLYWHEEL
BRAKE CABLE
3-11