Honda HRS216PKA Manual page 24

HRS216PKA • HRS216SKA • HRS216VKA
TRANSMISSION LEAKS OIL
1. Remove and clean the transmission
Note: Dark oil or a slight metallic residue in the oil is normal and usually does not indicate a problem.
• Replace the leaking seal(s) or O-ring as shown below.
• Fill the transmission to the proper level with SAE 10W-30 oil.
2. Reinstall the transmission, and proceed to the Smart Drive Cable Adjustment procedure
TRANSMISSION CASE
INSTALLATION: Use SAE 10W-30
engine oil and fill to the capacity
shown.
The correct oil level should be
18 ~ 20 mm (0.71 ~ 0.79 in) from the
top of the transmission case when it is
upside down.
CAPACITY: 65 cc (2.2 oz)
TOP OF
18 ~ 20 mm
CASE
(0.71 ~ 0.79 in)
(P. 12-9), and check to identify the source of the leak.
AXLE SHAFT OIL SEAL
CASE O-RING
SERVICE INFORMATION
(P. 3-9).
INPUT SHAFT OIL SEAL
AXLE SHAFT OIL SEAL
2-15