Honda HRS216PKA Manual page 121

HANDLE PIPE/CABLES
5. Grease the inside pin grooves of the upper and lower
bracket covers.
6. Snap the upper and lower bracket covers together with
the roller pin located in the pin groove. Make sure the
adjuster slots are located toward the rear of the mower.
7. Grease both sides of the clutch grip guides. Insert
the multi-position adjuster and spring in the track of the
lower clutch grip and place the assembly over the inner
bracket cover.
8. Place the upper clutch grip over the adjuster
assembly and secure to the lower clutch grip with the
four 4 mm self-tapping screws.
10-16
HRS216PKA • HRS216SKA • HRS216VKA
GRIP BRACKET (2)
UPPER BRACKET
COVER
LOWER BRACKET
COVER

BOTH SIDES OF GUIDES
SPRING
MULTI-POSITION
ADJUSTER
UPPER CLUTCH GRIP
4 mm
SELF-TAPPING
SCREW (4)
5 x 37 mm
ROLLER PIN

I NSIDE PIN
GROOVES
LOWER
CLUTCH GRIP
ADJUSTER
SLOTS
LOWER CLUTCH GRIP
Viewed from under
the handle pipe.