Kyocera TASKalfa Pro 15000c Installation Manual page 395

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
U034 Leading edge timing adjustment (In case of BK head replacement)
1
Go into U034 Adj Paper Timing.
2
Select [Start Position].
• Select [Full (Shift)] for lead edge timing adjustment in full speed.
3
Press [System Menu/Counter] key.
• Set feed cassette or paper speed in Test Print (PG) mode.
• When the optional PF is installed, set the paper feeding source other than MP tray.
4
Press [Start] key to output adjustment chart.
5
Press [System Menu/Counter] or [Stop] and get back to Full (Shift) screen.
• Select [1st Side] in case of first side adjustment and enter value. [mm]
• Select [2nd Side] in case of second side adjustment and enter value. [mm]
6
Change the setting value by using [+] [-] keys or the numeric keys.
• When the setting value is increased, the image moves backward, and it moves forward when the setting value
is decreased.
Full(Shift)
1st Side
01
2nd Side
02
Full
1st Side
01
2nd Side
02
Half
1st Side
01
2nd Side
02
• [Full (Shift)]: (Output from cassette, MP tray other than following setting) * With feed accelerating before registration
• [Full]: (Output to MP tray or selecting low paper feed speed) * Without feed accelerating before registration
• [Full (SRA3/12x18)]: * Print Full speed for SRA3/12x18 with duplex only
• [Half]: * Print for 1200dpi or IJ mat paper
7
Press [Start] key to fix the setting.
One side
or
First side of duplex
U034
-1.50
0.00
U034
-1.50
0.00
U034
-1.50
0.00
Second side of duplex
21.5mm
6-65
[CONFIDENTIAL]