Kyocera TASKalfa Pro 15000c Installation Manual page 137

Enhancement device setup procedure > Optional device installation
51
Attach the detent unit [A] (Screw x3: M4x8).
52
Attach the entrance motor unit [A] (Screw x3: M4x8).
NOTE
• Check that the belt is not out of position. If the belt is out of position, a horizontal transport unit jam occurs.
• Before securing the motor unit [A], slide it to the left. From the resulting gap, insert a thin screwdriver or other
tool to check the belt [B] tension.
3-59
[CONFIDENTIAL]