Kyocera TASKalfa Pro 15000c Installation Manual page 264

Enhancement device setup procedure > Optional device installation
142
Attach connector cover [B] to connecting plate [A]. Check if the cable is covered with
the connector cover [B].
IMPORTANT
Make sure not to pinch the wire.
Preparation for 4000 Sheet Finisher (DF-9100)
143
Pull out sub tray [B] from eject tray [A]. Insert 4 hooks [C] in the lifting plate [A] to the
holes [D].
[A]
144
Secure the exit tray [A] (Screw x2: M4x10 Black TP).
[A]
[B]
[A]
[B]
[D]
[C]
3-186
[CONFIDENTIAL]
[A]