Kyocera TASKalfa Pro 15000c Installation Manual page 156

Enhancement device setup procedure > Optional device installation
93
Attach the leveling shoes [A] and then adjust the height so that the tops of the units
are at the same level (Four locations: front left, front right, rear left, rear right). Place a
level on the top of the bridge kit and then adjust the machine level and height with
leveling shoes.
94
Fix the upper joint bracket to the bridge kit (Screw x2: M5x10).
95
Fix the lower joint bracket to the bridge kit (Screw x2: M5x10).
3-78
[CONFIDENTIAL]