Kyocera TASKalfa Pro 15000c Installation Manual page 148

Enhancement device setup procedure > Optional device installation
74
Remove the upper inner cover from the paper feeder.
1
Open the front door.
2
Remove two levers [A] (Screw x1 each)
3
Remove knob [B] (Screw x1)
4
Raise the Jam U9 removing plate and remove the handle [A] (Screw x2).
5
Remove three knobs [A] (Screw x1 each)
6
Remove upper inner cover [B] (Screw x5)
These screws are used in Step 81.
3-70
[CONFIDENTIAL]