Kyocera TASKalfa Pro 15000c Installation Manual page 128

Enhancement device setup procedure > Optional device installation
<B> Paper Feeder (PF-9100) to Bridge Kit for Main Unit (AK-9110)
CAUTION
• Make sure that the main power switch and AC power switch of the main machine are turned OFF and that its
power cord is disconnected before doing the following procedure.
NOTE
• This is the procedure for installing the paper feeder to the right of the main machine. The procedure for
installing it to the right of the bridge unit AK-9130 is the same as this procedure.
• See Paper Feeder (PF-9100)
Preparation for Bridge Kit for Main Unit (AK-9110)
30
Attach the 2 joint pins [A] on the connecting plate [B].
for unpacking.
[A]
[B]
3-50
[A]
[CONFIDENTIAL]