Kyocera TASKalfa Pro 15000c Installation Manual page 132

Enhancement device setup procedure > Optional device installation
41
Place the four leveling shoes [A] below the bolts [B] under each corner of the paper
feeder. Turn the nuts [B] to lower the bolt until the bolts reach the leveling shoes [A].
NOTE
• Install this unit on same line as main frame, otherwise it may cause of skew or paper jam.
• Check centering of paper and skew by U034. If there are any problems, adjust the installation position and fix
it.
Back
Main Unit
Front
42
Place a level on the top of the paper feeder and then adjust the machine level and
height with leveling shoes.
PF-9100
AK
3-54
[CONFIDENTIAL]