Kyocera TASKalfa Pro 15000c Installation Manual page 271

Enhancement device setup procedure > Optional device installation
159
Put back the wrench [A] to original position (Screw x1). Screw was removed in step
155.
[A]
160
Adjust the level.
1
Loosen 2 screws [A] on the left front and rear of DF-9100. Turning the bolt [B] with screw driver clockwise
makes the distance [F] in step 150 shorter and counterclockwise makes it longer
2
Secure each 2 screws [A].
[B]
[A]
[A]
3-193
[CONFIDENTIAL]
[B]