Kyocera TASKalfa Pro 15000c Installation Manual page 258

Enhancement device setup procedure > Optional device installation
125
Remove inner cover [A] (Screw x7). The screw will use in step 127.
126
Remove rear cover [A] (Screw x8). The screw will use in step 128.
127
Adjust the height.
1
Loosen 8 screws [A] on the right front and rear. Turning the bolt [B] clockwise makes AK unit higher and
counterclockwise makes it lower.
[A]
[A]
[A]
[A]
3-180
[CONFIDENTIAL]
[B]