Kyocera TASKalfa Pro 15000c Installation Manual page 200

Enhancement device setup procedure > Optional device installation
33
Remove wrench [A] (Screw x1). The screw will use in step 35.
[A]
34
Adjust the height.
1
Loosen 2 screws [B] on the right front and rear of DF-9100. Turning the bolt [C] clockwise with the wrench [A]
makes DF-9100 unit higher and counterclockwise makes it lower.
2
Secure 2 screws [B].
[B]
[B]
3-122
[CONFIDENTIAL]
[C]
[A]