Kyocera TASKalfa Pro 15000c Installation Manual page 130

Enhancement device setup procedure > Optional device installation
35
Lift the rear left cover [A] of the paper feeder slightly and remove it (Screw x10).
These screws are used in Step 45, or used in Step 86 when connect to 2nd PF-9100.
36
Open the front door and release the lock stay (screw x1). Screw is used in Step 43.
37
In case of turning off the tray dehumidifying heater, disconnect two connectors [A].
[A]
3-52
[CONFIDENTIAL]
[A]