Kyocera TASKalfa Pro 15000c Installation Manual page 199

Enhancement device setup procedure > Optional device installation
31
Bend both sides [B] of the food cover front [A] slightly and get 2 projections [C] out
from holes [D] by pushing down the cover [A] (Screw x2). The screw will use in step
38. Remove foot cover [A].
[B]
[A]
32
Pull the foot cover rear [A] and get 2 projections [B] out from holes [C] (Screw x3).
The screw will use in step 37. Remove foot cover rear [A].
[A]
[A]
[B]
[D]
[B]
[C]
[A]
3-121
[CONFIDENTIAL]
[B]
[A]
[C]
[B]