Kyocera TASKalfa Pro 15000c Installation Manual page 213

Enhancement device setup procedure > Optional device installation
3
Remove screws (Screw x1: M4x12/Screw x1: M4x10 Black TP). The screw will use in step 13-6.
4
Loosen screws (Screw x2). Remove stopper [A] by rotating it. Turning the bolt [C] clockwise with wrench [B]
makes DE unit higher and counterclockwise makes it lower.
NOTE
• Height can be adjusted by 2 steps higher and lower in 3.5 mm pitch.
M4x10 Black TP
3-135
[CONFIDENTIAL]
M4x12
[A]
[C]
[C]
[B]