Kyocera TASKalfa Pro 15000c Installation Manual page 328

Corrective action when service call occur > C2100
10
Check if the image conveying unit pull-out position sensor is attached correctly. If
not, fix it.
[A]
11
Hold the handles [B] and [C] then re-install the image conveying unit [A].
[B]
[A]
CAUTION
4 pins [C] on rails have to align with 4 holes [A] and [B] in frame of the image conveying unit. (Pay attention the
alignment otherwise the unit may drop.)
[C]
[C]
[B]
5-13
[CONFIDENTIAL]
[C]
[C]
[A]