Kyocera TASKalfa Pro 15000c Installation Manual page 361

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
64
Release the level bolts by rotating that are located bottom of the main unit with 19
mm wrench.
65
Attach the tapes to covers and wrap the machine for transportation damage.
NOTE
When transporting the main unit packed in the packaging box, there might be the possibility that the cushioning material that
holding the panel arm located at the lower position of the bundled waste tank might float. Therefore, relocate the empty box
of the bundled waste tank to the original position and then, transport the main unit.
Waste ink tank
Cuchoing material to hold
the panel arm
6-31
[CONFIDENTIAL]