Kyocera TASKalfa Pro 15000c Installation Manual page 194

Enhancement device setup procedure > Optional device installation
<F> 4000 Sheet Finisher (DF-9100) to Inverter and Decurler Unit (DE-9100)
IMPORTANT
• All tapes and packing materials on the accessories parts have to be removed.
• Main power switch of main unit has to be turned off and power cable has to be unplugged before install (DF-
9100).
NOTE
• Folding Unit (BF-9110) and/or punch unit (PH-7A/7C/7D) has to be installed first in case of using them.
• See 4000 Sheet Finisher (DF-9100)
Preparation for Inverter and Decurler Unit (DE-9100)
21
Open front right upper [A] and front left upper cover [B] of DE-9100. Put the label [C]
on exit upper inner cover as shown in picture. The label is accessory of DE-9100.
Close front right cover [A] and front left cover [B].
0
[B]
for unpacking.
[C]
[A]
3-116
[CONFIDENTIAL]