Installing Your Sr700Ac Gateway - ADTRAN SR700ac User Manual

Installing your SR700ac Gateway

1. Connect one end of the phone cable to the DSL port on the gateway and connect the other end to the phone jack on the
wall installed by your provider.
2. Connect one end of the Ethernet cable to a LAN port on the gateway and connect the other end to your computer.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of the gateway. Turn on
the unit by pressing the On/Off button on the back of the gateway.
Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before
you can begin using your Internet applications (browser, email, etc.). If you are unable to connect to the Internet, verify that all
cable connections are in place and the gateway's power is turned on.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019 9