Table of Contents
Advertisement
AF13(001110)
AF21(010010)
AF12(001100)
CS2(010000)
AF11(001010)
AF33(011110)
QoS Queue Config
On this page you can configure a queue and add it to a selected Layer2 interface.
1. In the left navigation bar, click
page appears.
2. In the
Name
field, enter a brief descriptive name for this queue.
3. In the
Enable
field, select to enable or disable a given QoS queue configured on the selected interface.
4. Note: Only one queue can be defined for any one interface/precedence pair, resulting in a maximum of three queues per
interface.
5. In the
Interface
field, select the Layer 2 interface to be associated with this queue. Options include Dynamic WAN and the
interfaces defined for your gateway. When you select an interface, additional fields appear. If you select Dynamic WAN,
they appear once for each defined WAN interface.
6. Fill in the other fields, using the information in the table below.
7. Click
Apply/Save
to save your settings.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
AF43(100110)
AF42(100100)
AF41(100010)
Advanced Setup
>
Quality Of Service
CS6(110000)
CS7(111000)
>
QoS Queue Config
and then click Add. The following
70
Advertisement
Table of Contents
