Table of Contents
Advertisement
Field Name
Specify the Next-Hop IPv6
address
7. Click Next. The following page appears.
8. Modify the settings if desired. All settings are optional.
Network Address Translation (NAT) allows you to share one Wide Area Network (WAN) IP address for multiple computers on
your Local Area Network (LAN). If you do not want to enable NAT (atypical) and wish the user of this gateway to access the
Internet normally, you need to add a route on the uplink equipment. Failure to do so will cause access to the Internet to fail.
The fields on this page are explained in the following table.
Field Name
Enable NAT
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
not specify a prefix length, the default of /64 is used.
WAN Next Hop IPv6 Address
In the
This address can be either a local link or a global unicast IPv6 address.
Descriptopn
This option is enabled by default and supports sharing the WAN interface
field, enter the IP address of the next WAN in the group.
43
Advertisement
Table of Contents
