Table of Contents
Advertisement
802.1X Authentication
1. On the Wireless > Security page for the band that you want to configure, select 802.1X in the
The following fields appear.
2. Fill in the fields, using the information in the field description table below.
3. Click
Apply/Save
to save the settings.
The fields on this page are explained in the following table.
Field Name
Description
RADIUS Server IP
Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server asso-
address
ciated with your network.
Enter the port number for the RADIUS server. Port 1812 is the current standard for RADIUS
RADIUS Port
authentication per the IETF RFC 2865. Older servers may use port 1645 . Options are 1 - 65535 .
( Optional ) Enter the encryption key (if required) needed to authenticate to the specified
RADIUS Key
RADIUS Server.
WEP Encryption
Wired Equivalent Privacy (WEP) encryption mode is enabled by default and cannot be
changed.
Select the length of the encryption method. Options are 128-bit and 64-bit . 128-bit is the
Encryption
Strength
more robust option for security.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Network Authentication
field.
109
Advertisement
Table of Contents
