Table of Contents
Advertisement
Field Name
GroupName
IP Address
Subnet Mask
Enable IGMP Snooping
Enable IGMP LAN to LAN Multicast
Enable LAN Side Firewall
Disable DHCP Server
Enable / Disable DHCP Server
Start IP Address
End IP Address
Leased Time (hour)
Static IP Lease List
Automatically create static IP leases
from the following OUIs
Static DNS Servers
Configure DHCP Options
section
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
Select an interface group from the list of available groups (defined on the Interface
Grouping page).
Enter the LAN IP address to be used by LAN devices connecting to this gateway.
Enter the subnet mask to be used by LAN devices connecting to this gateway.
Select to enable your gateway to listen to IGMP network traffic between hosts and
routers. By listening to these conversations, the gateway maintains a map of which
links need which IP multicast streams. Options are:
Standard Mode: Allows multicast traffic to flood to all bridge ports when there
l
is no client subscribed to any multicast group.
Blocking Mode: Blocks multicast data traffic, preventing it from flooding to all
l
bridge ports when no client subscriptions to a multicast group are present. This
is the default.
Allows multicast traffic between LANs. Options are Disable and Enable . The default is
Disable .
Enables the restriction of traffic between LAN hosts.
Prevents the DHCP functionality of your gateway from automatically assigning LAN IP
addresses to host devices as they connect with the gateway.
Allows the DHCP functionality of your gateway to automatically assign LAN IP addresses
to host devices as they connect with the gateway. Fill in the next three fields to con-
figure this action.
(Available when
Enable DHCP Server
IP address range to be assigned by the DHCP server.
(Available when
Enable DHCP Server
address range to be assigned by the DHCP server.
(Available when Enable DHCP Server is selected) Enter the number of hours for which
an IP address will be leased.
Specify a literal, static
IP address
of your LAN host devices. Click
click Apply/Save. Repeat this step to create any additional entries that you need.
For LAN hosts, IP addresses can be assigned manually or by using DHCP. Click
Enter the OUI and click Apply/Save. Repeat this step to create any additional entries
that you need.
( Optional ) Enter the IP addresses for the
is selected) Enter the beginning of the class C,
is selected) Enter the end of the class C, IP
to be associated with a
specific MAC Address
Add
Entries. Enter the MAC address and IP address and
Primary
Secondary
and
of one
Add
OUI.
DNS Servers.
51
Advertisement
Table of Contents
