Table of Contents
Advertisement
Field Name
Description
Precedence
Select the priority value to be associated with the defined QoS queue. Options
vary by interface and can include 1(SP) - 4 (SP|WRR|WFQ), 1(WRR|WFQ) - 7
(WRR|WFQ) and 8(WRR).
Note: The lower the precedence value, the higher priority the queue is given.
Traffic is given priority based on the combined values from this field and
Weight
Scheduler Algorithm
Select an algorithm for data priority in queues. Options are:
Queue Weight
Enter the weighting value to associate with this queue. Options are 1 - 63. The
default is 1.
Note: The higher the weighting value, the more frames that are sent pro-
portionately given the algorithm employed. Traffic is given priority based on the
combined values from this field and the
The following options appear only when the
Enter the minimum shaping rate for packets in QoS queues. Options are 1 - 100000
Minimum Rate
Kbps.
To specify no minimum shaping, enter -1.
Enter the shaping rate for packets in QoS queues. Options are 1 - 100000 Kbps.
Shaping Rate
To specify no minimum shaping, enter -1.
Shaping Burst Size
Enter the shaping burst size to be applied to packets in the defined queue.
Options are 1600 bytes or greater.
( Appears when you select either of the Weighted options in the
Queue Weight
Algorithm
WLAN Queue
On this page, you can view the wireless queues and classifications.
Note: The
WMM Advertise
option must be enabled before these classifications will function. This option is enabled by default. If you
have disabled it, go to the Wireless > Basic page and clear the
In the left navigation bar, click
appears.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
field.
Strict Priority: (Available only when Dynamic_WAN is selected in the
l
Interface
field) Allows shaping of rate and burst size for packets in queue.
Weighted Round Robin: Applies a fair round robin scheme weighting that is
l
effective for networks with fixed packet sizes, e.g., ATM networks.
Weighted Fair Queuing: Applies a fair queuing weighting scheme via allow-
l
ing different sessions to have different service shares for improved data
packets flow in networks with variable packet size, e.g., PTM/IP networks.
Scheduler Algorithm
field ) Enter a weight for prioritizing this queue. Options are 1 - 63 .
Advanced Setup
>
Quality Of Service
Queue Precedence
field.
field is set to Strict Priority .
Disable WMM Advertise
checkbox.
>
QoS Queue Config
>
Queue
Scheduler
Wlan
Queue. The following page
71
Advertisement
Table of Contents
