Table of Contents
Advertisement
2. To add an address:
a. Click Add. The following page appears.
b. Enter the address for which you want to restrict access.
c. Click Apply/Save. You are returned to the Management Access Lists page.
d. To add up to 9 more addresses, repeat steps 2a - 2c.
3. To remove an address, click the
Logout Timer
On this page, you can define the maximum time that a session can remain open before the gateway logs out.
1. In the left navigation bar, click
2. In the
Logout Timer Period
minutes. The default is 15 minutes. To disable this feature, enter a zero (0) in the field.
Update Software
On this page, you can update the firmware of your SmartRG gateway. Software updates for SmartRG products are available for down-
load by direct customers of SmartRG via the SmartRG Customer Portal.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Remove
checkbox next to it and then click Remove. The list is updated.
Management
>
Access Control
field, type the number of minutes after which a session will be ended. Options are 0 - 60
>
Logout
Timer. The following page appears.
149
Advertisement
Table of Contents
