Table of Contents
Advertisement
2. Modify settings as desired.
3. Click
Save/Apply
to commit your settings.
The fields on this page are explained in the following table.
Field Name
Description
Services
This column identifies the SCL services that can be enabled or disabled. Options
are FTP , HTTP , ICMP , SNMP , SSH , TELNET , and TFTP .
Use encrypted HTTP(S) Click this checkbox to implement secured HTTP. This option is enabled for the LAN.
Warning:
LAN
Select the service enabled on LAN side firewall. Depending on configuration set-
tings made elsewhere in the GUI, this column may be read-only.
Note: ICMP is an always-enabled service by default and has no checkbox.
( Appears only when WAN services are configured ) Select the service enabled on
WAN
the WAN side firewall.
( Appears only when WAN services are configured ) The port the access control
WAN Port Number
applies to on the WAN side for the given service. See port information below.
Service port
options
FTP
FTP Service access (For WAN, this is the default port).
HTTP
HTTP Service access (For WAN, this is in association with specified port. The default
is port 80 .
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
When you click this option, the gateway reboots.
146
Advertisement
Table of Contents
