Table of Contents
Advertisement
1. In the left navigation bar, click
2. Enter a
Tunnel
Name.
3. Select the WAN and LAN interfaces associated with the tunnel you wish to establish. The Manual button is selected by
default.
4. Enter the appropriate values in the
5. Click
Apply/Save
to commit your changes.
IPv4inIPv6
On this page, you can configure the IPv4inIP6 settings.
1. In the left navigation bar, click
Note: Currently, only the DS-Lite mechanism is supported.
2. Enter a brief descriptive
3. Select the
LAN
and
WAN
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
>
IP Tunnel
IPv4 Mask Length, 6rd Prefix with Prefix Length
Advanced Setup
>
IP Tunnel
Tunnel
Name.
interfaces associated with the tunnel you wish to establish.
>
IPv6inIPv4
and then click Add. The following page appears.
and
>
IPv6inIPv4
and then click Add. The following page appears.
Border Relay IPv4 Address
fields.
88
Advertisement
Table of Contents
