Security - ADTRAN SR700ac User Manual

Hide thumbs Also See for SR700ac:
Table of Contents

Advertisement

Field Name
Description
the wireless network.
Click to stop the wireless from advertising Wireless Multimedia (WMM) func-
Disable WMM Advertise
tionality. WMM provides basic Quality of Service (QOS) for applications.
Click to enable Wireless Multicast Forwarding (WMF). Multicast traffic is for-
Enable Wireless Multicast
Forwarding
warded across wireless clients.
SSID
Enter the Wi-Fi SSID.
BSSID
Enter the Basic Service Set Identifier (BSSID) to provide the MAC address
assigned to the wireless router.
Country
Select the country in which the gateway is deployed.
Country RegRev
Enter the revision number of the regulations being followed for the selected
country. The default is 0 .
Max Clients
Enter the maximum number of clients that can access the route wirelessly.
Wireless - Guest/Virtual Access Points
Enabled
Click to enable a virtual wireless access point for guest access.
SSID
Enter your wireless SSID.
Click to hide the SSID from being broadcast publicly.
Hidden
Click to prevent client PCs from communicating with one another.
Isolate Clients
Click to stop the wireless from advertising Wireless Multimedia (WMM) func-
Disable WMM Advertise
tionality.
Enable WMF
Click to enable Wireless Multicast Forwarding (WMF).
Max Clients
Enter the maximum number of clients allowed for this wireless channel.
Displays the Basic Service Set Identifier or N/A .
BSSID

Security

On this page, you can configure security features of the wireless LAN interface, either manually or via Wi-Fi Protected Setup (WPS).
Note: When WPS is enabled, the
default value. If
Hide Access Point
1. In the left navigation bar, click
GH band, click
2.4 Ghz Band
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
table
STA PIN
and
Authorized MAC
is enabled or the MAC filter list is empty with "Allow" selected, WPS2 will be disabled.
Wireless
> Security. The Security page appears for the 5 GHz band page. To configure the 2.4
in the left menu and then click Security.
fields appear. If both of these fields are empty, PBC becomes the
106

Advertisement

Table of Contents
loading

Table of Contents