Table of Contents
Advertisement
Field Name
Description
NICs when to awake from power save mode to check for buffered frames at the
access point. Options are 1 and 65535 ms. The default is 100 ms.
Global Max Clients
Enter the maximum number of clients that can assess this wireless network at one
time. The maximum for 5GHz is 80; the maximum for 2.4 GHz is 128. The default is
the maximum number for each band.
Note: You must change this field before you can change the
Wireless > Basic. page.
Xpress™ Technology
Select whether to enable Xpress Technology. This technology is compliant with
draft specifications of two planned wireless industry standards. Options are
Enabled and Disabled . The default is Enabled .
( Available for 5 GHz band only ) Select whether to enable support for 802.11 reg-
Regulatory Mode
ulations. Options are Disabled , 802.11h , and 802.11d . The default is 802.11h .
( Available for 5 GHz band only ) The radar check parameter setting for traffic try-
Pre-Network Radar
ing to access your gateway from outside the network. The displayed value is -1 .
Check
( Available for 5 GHz band only ) The radar check setting for traffic trying to access
In-Network Radar
your gateway from inside your network. The displayed value is -1 .
Check
( Available for 5 GHz band only ) Select the TPC mitigation value in db. Options are
TPC Mitigation(db)
0(off) , 2 , 3 , and 4 . The default is 0(off) .
Select the desired output power (by percentage). Options are 20% , 40% , 60% ,
Transmit Power
80% , and 100% . The default is 100% .
WMM (Wi-Fi Multimedia) Select whether to enable this technology. It allows multimedia services (audio,
video and voice packets) to get higher priority for transmission. Options are Auto ,
Enabled , and Disabled . the default is Enabled .
WMM No Acknow-
Select whether acknowledgements are sent (applied at the MAC level). Enabling
ledgement
this option allows better throughput but, in a noisy RF environment, higher error
rates may result. Options are Enabled and Disabled . The default is Disabled .
WMM APSD
Select whether to enable Automatic Power Save Delivery, a power consumption
saving feature. Options are Enabled and Disabled . FOr the 5 GHz band, the
default is Disabled . For the 2.4 GHz band, the default is Enabled .
( Available for 5 GHz band only ) Select to concentrate the transmission signal at
Beamforming Trans-
mission (BFR)
the gateway location. This results in a better signal and potentially better
throughput. Options are Enabled and Disabled . The default is Disabled .
( Available for 5 GHz band only ) Select to concentrate the transmission signal at
Beamforming Reception
the gateway location. Options are Enabled and Disabled . The default is Disabled .
(BFE)
Band Steering
Select whether to detect if the client has the ability to use two bands. When
enabled, the less-congested 5GHz network is selected (by blocking the client's
2.4GHz network). Options are Disabled and Enabled . The default is Disabled .
Enable Traffic Sched-
( Available for SR515ac models only ) Select whether to enable scheduling of
uler
traffic to improve efficienty and increase usable bandwidth for some types of pack-
ets by delaying other types. Options are Disable and Enable . The default is Dis-
able .
Airtime Fairness
Select how the gateway will manage the receiving signal with other devices.
Options are Disable and Enable . The default is Enable .
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Max Clients
on the
119
Advertisement
Table of Contents
