Table of Contents
Advertisement
Field Name
Description
Remote Loopback
Click to enable on-demand link diagnostics, including bit-error-rate approximation.
Active Mode
Click to enable this feature.
Ethernet Service OAM (802.1ag/Y.1731)
WAN Interface
Select the WAN interface that you want to test.
( Appears for the 802.1ag option only ) Select the domain level for this maintenance domain.
MD Level
Options are 0 - 7 . The larger the domain, the higher the value you should select.
( Appears for the 802.1ag option only ) Enter the name of the maintenance domain, e.g., Broadcom.
MD Name
( Appears for the 802.1ag option only ) Enter the maintenance association ID, e.g., BRCM.
MA ID
( Appears for the Y.1731 option only ) Enter the level of the maintenance entity group.
MEG Level
( Appears for the Y.1731 option only ) Enter the ID of the MEG.
MEG ID
Enter the ID of the local maintenance entity group end point.. Options are 1 - 8191 . The default is
Local MEP ID
1 .
Local MEP VLAN ID
Enter the VLAN ID of the local MEP. Options are 1 - 4094 . The default is -1 (no VLAN tag).
CCM Transmission
Click to enable continuity check message transmission.
Enter the ID of the remote MEP. Options are 1 - 8191 . The default is -1 (no remote MEP).
Remote MEP ID
Loopback and Linktrace Test
Target MAC
Enter the MAC address for the test, e.g., 02:10:18:aa:bb:cc.
Enter the maximum number of hops allowed. Optinons are 1 - 233 . The default is -1 (no limit).
Linktrace TTL
Loopback Result
Displays the results of the loopback test.
Linktrace Result
Displays the results of the linktrace test.
Ping Host
On this page, you can ping a server by host name or IP address.
1. In the left navigation menu, click
2. Enter the host name or IP address.
3. Click
Ping
Host. The details of the ping appear on the page.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
section
section
Diagnostics Tools
> Ping. The following page appears.
128
Advertisement
Table of Contents
