Table of Contents
Advertisement
2. Select an ATM interface for the WAN service and then click Next. The following page appears.
3. Select Bridging. The multicast source fields appear.
4. Modify the fields as needed, using the information in the following table.
Field Name
Allow as IGMP Multicast
Source
Allow as MLD Multicast
Source
Enter Service Descrip-
tion
Enter 802.1P Priority
Enter 802.1Q VLAN ID
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
Select to enable this service to act as an IGMP multicast source.
Select to enable this service to act as an MLD multicast source.
( Optional ) Enter a name to describe this configuration.
Enter the priority for this WAN service. Options are 0 - 7 . The default is -1 (disabled).
For tagged service, enter values in this field and the
For untagged service, accept the default of -1 in this field and in the
field.
Enter the VLAN ID for this WAN service. Options are 0 - 4094 . The default is -1 (disabled).
802.1Q VLAN ID
field.
802.1Q VLAN ID
47
Advertisement
Table of Contents
