Table of Contents
Advertisement
supported only on specific SmartRG models. Those exceptions are specified in this guide.
In the left navigation bar, click
The fields on this page are explained in the following table.
Field Name
Description
Interface
Connection interface (Layer 2 interface) through which the gateway handles the traffic.
Description
Service description such ipoe_0_0_1, showing the type of WAN and its ID.
Service type. Options are PPPoE , IPoE , and Bridge .
Type
VLAN ID. Options are Disabled or 0 - 4094 .
VlanMuxId
State of IPv6. Options are Enabled and Disabled .
IPv6
IGMP proxy. Options are Enabled and Disabled .
Igmp Pxy
IGMP source option. Options are Enabled and Disabled .
Igmp Src Enbl
MLD Pxy
MLD proxy.
MLD source option. Options are Enabled and Disabled .
MLD Src Enbl
State of NAT. Options are Enabled and Disabled .
NAT
State of the Firewall. Options are Enabled and Disabled .
Firewall
Status
State of the WAN connection. Options are Disconnected , Unconfigured , Connecting , and Con-
nected .
IPv4 Address
Obtained IPv4 address.
IPv6 Address
Obtained IPv6 address.
Statistics
In this section, you can view network interface information for LAN, WAN Service, xTM and xDSL. All data is updated in 15-minute
intervals.
LAN
On this page, you can view the received and transmitted bytes, packets, errors and drops for each LAN interface configured on your
gateway. All local LAN Ethernet ports, Ethernet WAN ports and wireless Interfaces are included. For some models, statistics are
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Device Info
> WAN. The following page appears.
12
Advertisement
Table of Contents
