Table of Contents
Advertisement
Field Name
PPP Username
PPP Password
PPPoE Service Name
Authentication Method
Link Control Protocol
LCP Keepalive Period
LCP Retry Threshold
PPP IP Extension
Advanced DMZ
Use Static IPv4 Address
Use Static IPv6 Address
Enable IPv6 Unnumbered
Model
Launch Dhcp6c for Address
Assignment (IANA)
Launch Dhcp6c for Prefix
Delegation (IAPD)
Retry PPP password on
authentication error
Enable PPP Debug Mode
Bridge PPPoE Frames
Between WAN and Local
Ports
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
Enter the username required for authentication to the PPP server.
To use the MAC address as the user name, click the
checkbox.
Enter the password required for authentication to the PPP server.
( Optional ) Enter a description for this service.
Select a means for authentication. Options are:
AUTO: Attempt to automatically detect handshake protocols (listed below). This is the
l
default.
PAP: Password Authentication Protocol (plaintext passwords).
l
CHAP: Challenge Handshake Authentication Protocol. (MD5 hashing scheme on pass-
l
words).
MSCHAP: Microsoft Challenge Handshake Authentication Protocol. (Microsoft encrypted
l
password authentication protocol).
section
The frequency at which the keepalive packet is sent by the gateway to the PPP server.
Enter the number of additional attempted packets that the gateway will send (in the event
that the PPP server does not respond to the Keepalive) before giving up and declaring the con-
nection as Failed.
Select this option to forward all traffic to the advanced DMZ IP specified in the next field.
( Available when
PPP IP Extension
Non DMZ
handling. In the
forwarded.
Specify the IPv4 Address to apply for this WAN service in the
Specify the IPv6 Address to apply for this WAN service in the
Click to enable IP processing on a serial interface without assigning it an explicit IP address.
The IP address of another interface can be can "borrow" the IP address of another interface
already configured on the router, which conserves network and address space.
( Available only for IPv6 environments ) Select this option for the CPE to receive the WAN IP
from the ISP.
( Available only for IPv6 environments ) This option is enabled by default. The CPE generates
the WAN IP's prefix from the server's REST by MAC address. Click the checkbox to disable this
option.
Enter the maximum number of PPP authentication retries on failure in the
tication retries
field. Options are 1 - 65536 . The default is 65536 (unlimited retries).
Select to have the system put more PPP connection information into the system log of the
device. This is for debugging errors and not for normal usage.
Select to enable PPPoE passthrough to relay PPPoE connections from behind the modem. Also
known as Half-Bridged mode.
User base MAC address as username
is selected ) Select this option to enable advanced DMZ
fields, specify the IP address and net mask to which PPPoE traffic is
IPv4 Address
field that appears.
IPv6 Address
field that appears.
Max PPP authen-
34
Advertisement
Table of Contents
