Table of Contents
Advertisement
Field Name
Description
Network Re-Auth
Enter the interval at which the client must re-authenticate with the gateway. Options
are ??? seconds. The default is 36000 seconds (10 hours).
Interval
WPA Group Rekey
The frequency at which the gateway automatically updates the group key and sends it
to connected LAN client devices. Options are 1 - 65535 seconds. The default is 0 (dis-
Interval
abled).
RADIUS Server IP
Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server
address
associated with your network.
Enter the port number for the RADIUS server. Port 1812 is the current standard for
RADIUS Port
RADIUS authentication per the IETF RFC 2865. Older servers may use port 1645 . Options
are 1 - 65535 .
( Optional ) Enter the encryption key (if required) needed to authenticate to the spe-
RADIUS Key
cified RADIUS Server.
WPA Encryption
Select the encryption standard. This field displays the option most compatible with the
selected network authentication method. Options are:
l
l
WEP Encryption
Wired Equivalent Privacy (WEP) encryption mode is disabled by default and cannot be
changed.
WPA2-PSK & Mixed WPA2/WPA-PSK Authentication
The same configuration fields apply for both WPA2-PSK and Mixed WPA2/WPA-PSK authentication methods.
1. On the Wireless > Security page for the band that you want to configure, select WPA2-PSK or Mixed WPA2/WPA-PSK in the
Network Authentication
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
AES: Advanced Encryption Standard.
TKIP+AES: AES combined with TKIP (Temporary Key Integrity Protocol).
field. The fields shown below appear.
111
Advertisement
Table of Contents
