Installing Your Sr905Acv Gateway - ADTRAN SR905acv User Manual

Installing your SR905acv Gateway

1. Connect the gateway to incoming services:
For Ethernet services, connect one end of an Ethernet cable to the WAN port on the gateway and connect the other
l
end of the cable to the wall jack installed by your provider.
For fiber services:
l
a. Slide open the small door at the right end of the gateway's back.
b. Insert the SFP transceiver (included with the gateway) into the port.
c. Connect one end of the fiber cable to the SFP transceiver and connect the other end of the cable to the wall
jack installed by your provider.
For phone (DSL) services, connect one end of a phone cable to one of the Phone ports on the gateway and connect the
l
other end of the cable to the wall jack installed by your provider.
2. Connect a LAN port on the gateway to your PC using an Ethernet cable.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of the gateway.
4. Turn on the unit by pressing the Power button on the side of the gateway.
The gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before
you can begin using your Internet applications (browser, email, etc.).
If connection to the Internet is unsuccessful, verify that all cable connections are in place and the gateway's power is turned on.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020 8