Table of Contents
Advertisement
Field Name
Server IP Address
External Port Start
External Port End
Protocol
Internal Port Start
Internal Port End
Port Triggering
Some applications require that specific ports in the gateway's firewall be opened for access by remote parties. The Port Trigger fea-
ture dynamically opens up the open ports in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote
party using the triggering ports. The gateway allows the remote party from the WAN side to establish new connections back to the
application on the LAN side using the Open Ports.
1. In the left navigation bar, click
2. Customize the fields as needed for the firewall pinholes you wish to establish. A maximum 96 entries can be configured.
3. Click
Save/Apply
to commit your changes. The selected service appears on the NAT Port Triggering Setup page.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
enter the ports and select a protocol in the table at the bottom of the page.
Enter the final octet of the IP address of the LAN client where the service is hosted.
Enter the first external port for this server.
Enter the last external port for this server.
Select the protocol to be used with this range of ports. Options are TCP , UDP , or TCP/UDP .
Enter the first internal port for this server.
Enter the last internal port for this server.
Advanced Setup
>
NAT
>
Port Triggering
and then click Add. The following page appears.
58
Advertisement
Table of Contents
